Audiomix
Bransjeaktør
Jeg bygger det meste selv, men høyttalere har jeg ikke laget på over 30 år. Det ble til at jeg kjøpte ferdig. Et ufrivillig langt opphold på Gardermoen i vinter gjorde meg obs på et par høyttalere som var nye for meg. HiFi entusiast og konstruktør Allan Hendry har kommet med en serie nye høyttalere med navnet MonoPulse.
Se her også:
http://www.monopulse.co.uk
Allan har hele tiden svart på spørsmål og informert. Hele tiden litt foran skjemaet. Sist fredag ankom nye høyttalere. Foran skjemaet!
Her føger det meste av kommunikasjonen jeg har hatt med Allan. Til slutt tok spedisjonsfirmaet over.............
Good morning Hans,
Thank you for your phone call. I am sorry if I seemed to end it a bit quickly - I was in fact on a petrol station forecourt.
That is a very impressive and beautifully built amplifier you have made.
Your friends are right. Regardless of the original quality of a speaker, the slow ageing of materials - hardening or deterioration - will change critical parameters.
The Model 42 would be our strong recommendation. It has a combination of high sensitivity (92dB) and high impedance (6.7 ohm minimum) which we believe is unrivalled.
Also, believe me; the accuracy of the imaging is stunning.
Have you seen the review in issue 42 of Hi-Fi + ? If not we could e-mail or post you a scan.
On finishes. There is a choice of Metallic Black or Gunmetal for the steel surrounds - and a choice of ten cloth colours.
I hope you find this of use.
Best regards, Allan Hendry
Hello again,
To answer your various questions:
Yes the gunmetal is rifle-pipe colour. A metallic mid grey. It is our most popular metal colour.
For cloth we do a mid/dark grey, we call slate. That plus gunmetal is the most popular clour combination.
On the finish, the aim was to make the design as clean and functional as possible - form follows function - we are engineers. We needed the cloth for a front grill - and the steel to damp the cabinet and isolate the HF unit. We stopped there. Except at the back where there is a matching grey foam to reduce rearward emissions, not visible from the front.
The drive units are:
LF. A French, Audax, 220mm, shielded unit. We picked this for the 42A because of its good bass, very high sensitivity, and ease of drive.
HF. A Morel Israeli via Holland unit. They have a fantastic reputation. This high performance unit has a ferrofluid cooled 28mm diam voice coil (which is big), again shielded, and a very good transient performance. Another reson we chose it is that the mounting is compact to get very close the the LF unit and get the impulse accuracy we need in the vertical listening range.
On the 180 Hz peak, and positioning. We have improved the design, fixing this, and now also offering the ability to tune the bass response with a bass port adaptor. I attach our latest instruction sheet which goes with each delivery.
I hope this all helps.
Hello Hans,
Payment has come through and production continues.
We are still intending to ship during the week of 19th June.
Best regards, Allan
Hello Hans,
The units will be finished today and tested over the weekend.
We could then ship on Monday or Tuesday, and will take about 7 days to get to you.
Best regards, Allan
Hello Hans,
We deliver to the shippers this morning. They advise 4 - 5 days.
I hope you will show them to your friends!
Regards, Allan
Good Morning,
We are the shipping company appointed by Mono Pulse and are sending you a consignment via courier. I would be most grateful if you could advise a contact telephone number for yourself.
Many Thanks
Julie
Hello,
The shipment should be delivered Friday/Monday, I will advise you of the tracking details and contact number for the courier company shortly.
Many Thanks for your quick response.
Best Regards
Julie
Good Morning,
Please be advise your recent shipment has been booked as follows:
FEDEX DOCKET NUMBER: xxxxxxxxxxxxxxxxx
Ctc Tel No. xxxxxxxxxx
Best Regards
Julie
Fortsetter..........................
Se her også:
http://www.monopulse.co.uk
Allan har hele tiden svart på spørsmål og informert. Hele tiden litt foran skjemaet. Sist fredag ankom nye høyttalere. Foran skjemaet!
Her føger det meste av kommunikasjonen jeg har hatt med Allan. Til slutt tok spedisjonsfirmaet over.............
Good morning Hans,
Thank you for your phone call. I am sorry if I seemed to end it a bit quickly - I was in fact on a petrol station forecourt.
That is a very impressive and beautifully built amplifier you have made.
Your friends are right. Regardless of the original quality of a speaker, the slow ageing of materials - hardening or deterioration - will change critical parameters.
The Model 42 would be our strong recommendation. It has a combination of high sensitivity (92dB) and high impedance (6.7 ohm minimum) which we believe is unrivalled.
Also, believe me; the accuracy of the imaging is stunning.
Have you seen the review in issue 42 of Hi-Fi + ? If not we could e-mail or post you a scan.
On finishes. There is a choice of Metallic Black or Gunmetal for the steel surrounds - and a choice of ten cloth colours.
I hope you find this of use.
Best regards, Allan Hendry
Hello again,
To answer your various questions:
Yes the gunmetal is rifle-pipe colour. A metallic mid grey. It is our most popular metal colour.
For cloth we do a mid/dark grey, we call slate. That plus gunmetal is the most popular clour combination.
On the finish, the aim was to make the design as clean and functional as possible - form follows function - we are engineers. We needed the cloth for a front grill - and the steel to damp the cabinet and isolate the HF unit. We stopped there. Except at the back where there is a matching grey foam to reduce rearward emissions, not visible from the front.
The drive units are:
LF. A French, Audax, 220mm, shielded unit. We picked this for the 42A because of its good bass, very high sensitivity, and ease of drive.
HF. A Morel Israeli via Holland unit. They have a fantastic reputation. This high performance unit has a ferrofluid cooled 28mm diam voice coil (which is big), again shielded, and a very good transient performance. Another reson we chose it is that the mounting is compact to get very close the the LF unit and get the impulse accuracy we need in the vertical listening range.
On the 180 Hz peak, and positioning. We have improved the design, fixing this, and now also offering the ability to tune the bass response with a bass port adaptor. I attach our latest instruction sheet which goes with each delivery.
I hope this all helps.
Hello Hans,
Payment has come through and production continues.
We are still intending to ship during the week of 19th June.
Best regards, Allan
Hello Hans,
The units will be finished today and tested over the weekend.
We could then ship on Monday or Tuesday, and will take about 7 days to get to you.
Best regards, Allan
Hello Hans,
We deliver to the shippers this morning. They advise 4 - 5 days.
I hope you will show them to your friends!
Regards, Allan
Good Morning,
We are the shipping company appointed by Mono Pulse and are sending you a consignment via courier. I would be most grateful if you could advise a contact telephone number for yourself.
Many Thanks
Julie
Hello,
The shipment should be delivered Friday/Monday, I will advise you of the tracking details and contact number for the courier company shortly.
Many Thanks for your quick response.
Best Regards
Julie
Good Morning,
Please be advise your recent shipment has been booked as follows:
FEDEX DOCKET NUMBER: xxxxxxxxxxxxxxxxx
Ctc Tel No. xxxxxxxxxx
Best Regards
Julie
Fortsetter..........................