Hei !En bekjent har funnet en SP-10 mk2. Spilleren har stått ute i regn, men jeg har fått den, og vil se på om jeg kan få sving på den. Jeg mangler imidlertid strømforsyning, og ønsker ikke å bruke mye penger på en før jeg vet om spilleren går. Er det noen som vet hva slags spenning drivverket skal ha, slik at jeg kan finne noe jeg kan bruke midlertidig mens jeg fikler med spulleren... ?Evt. Noen som har en original iggende ?Mvh.Stian
|
Technics SP-10 mk2 strømforsyning ?
- Trådstarter Boogie-Stian
- Startdato
[h=4]Specifications[/h]SP-10 mk1
Platter: 300mm 6lb aluminium diecast
Motor: 20-poles, 60-slots, ultra low speed electronic commutator motor (15V, 85mA)
Speeds: 33 and 45rpm
Speed change method: electrical change
Fine speed control: +-2% by variable resistor
Wow and flutter: less than 0.03% WRMS
Rumble: better than -60dB
Build up time: within 1/2 rotation at 33 rpm
Dimensions: 14" X 14" x 4"
Weight: 20lb
SP-10 mk2
Motor: brushless DC motor, electronic rectification, quartz-controlled phase-locked servo circuit
Plater: 320mm 2.9kg aluminium
Speeds: 33, 45 and 78rpm
Pitch control: 10% (mk2P)
Starting torque: 6kg-cm
Build up time: 0.25s to 33rpm
Braking time: 0.3s from 33rpm
Speed fluctuation by load changes: 0% within 5kg-cm
Wow and flutter: 0.025% WRMS (JIS C5521)
Rumble: -73dB (DIN 45539B)
Dimensions: 102.5 x 368.5 x 368.5mm
Weight: 9.5kg
SP-10 mk2A
Motor: brushless DC motor, electronic rectification, quartz-controlled phase-locked servo circuit
Plater: 320mm 2.9kg aluminium
Speeds: 33, 45 and 78rpm
Starting torque: 6kg-cm
Build up time: 0.25s to 33rpm
Braking time: 0.3s from 33rpm
Speed fluctuation by load changes: 0% within 5kg-cm
Wow and flutter: 0.02% WRMS (JIS C5521)
Rumble: -86dB (IEC 98A weighted)
Dimensions: 102.5 x 368.5 x 368.5mm
Weight: 9.5kg
SP-10 mk3
Motor: brushless DC motor, electronic rectification, quartz-controlled phase-locked servo circuit
Plater: 320mm, 10kg copper/aluminium
Speeds: 33, 45 and 78rpm
Pitch control: 20%
Starting torque: 16kg-cm
Build up time: 0.25s to 33rpm
Braking time: 0.3s from 33rpm
Speed fluctuation by load changes: 0% within 10kg-cm
Wow and flutter: 0.015% WRMS (JIS C5521)
Rumble: -92dB (IEC 98A weighted)
Dimensions: 369 x 113 x 369mm
Weight: 18kg
Platter: 300mm 6lb aluminium diecast
Motor: 20-poles, 60-slots, ultra low speed electronic commutator motor (15V, 85mA)
Speeds: 33 and 45rpm
Speed change method: electrical change
Fine speed control: +-2% by variable resistor
Wow and flutter: less than 0.03% WRMS
Rumble: better than -60dB
Build up time: within 1/2 rotation at 33 rpm
Dimensions: 14" X 14" x 4"
Weight: 20lb
SP-10 mk2
Motor: brushless DC motor, electronic rectification, quartz-controlled phase-locked servo circuit
Plater: 320mm 2.9kg aluminium
Speeds: 33, 45 and 78rpm
Pitch control: 10% (mk2P)
Starting torque: 6kg-cm
Build up time: 0.25s to 33rpm
Braking time: 0.3s from 33rpm
Speed fluctuation by load changes: 0% within 5kg-cm
Wow and flutter: 0.025% WRMS (JIS C5521)
Rumble: -73dB (DIN 45539B)
Dimensions: 102.5 x 368.5 x 368.5mm
Weight: 9.5kg
SP-10 mk2A
Motor: brushless DC motor, electronic rectification, quartz-controlled phase-locked servo circuit
Plater: 320mm 2.9kg aluminium
Speeds: 33, 45 and 78rpm
Starting torque: 6kg-cm
Build up time: 0.25s to 33rpm
Braking time: 0.3s from 33rpm
Speed fluctuation by load changes: 0% within 5kg-cm
Wow and flutter: 0.02% WRMS (JIS C5521)
Rumble: -86dB (IEC 98A weighted)
Dimensions: 102.5 x 368.5 x 368.5mm
Weight: 9.5kg
SP-10 mk3
Motor: brushless DC motor, electronic rectification, quartz-controlled phase-locked servo circuit
Plater: 320mm, 10kg copper/aluminium
Speeds: 33, 45 and 78rpm
Pitch control: 20%
Starting torque: 16kg-cm
Build up time: 0.25s to 33rpm
Braking time: 0.3s from 33rpm
Speed fluctuation by load changes: 0% within 10kg-cm
Wow and flutter: 0.015% WRMS (JIS C5521)
Rumble: -92dB (IEC 98A weighted)
Dimensions: 369 x 113 x 369mm
Weight: 18kg