Helt strøken MM/MC Sølv Riaa fra Project som på bildet. Spiller nøytralt og oppløst - av de bedre i denne prisklassen med mange innstillinger.
Kan sendes mot kjøpers risk og kostnad - har emballasjen. Betaler du forskudd så tar jeg frakten
Data fra produsentens side:
The Pro-Ject Phono Box SE II is a totally new design that lifts the performance to an even higher level. a premium chipset, a beefier power supply and the highest grade components form the basis of this audio marvel. it uses five parallel oP-amps for each channel. using SmD technology, the signal paths are reduced dramatically. the result is optimum sound quality and minimised levels of noise and distortion. Mini switches are used to adjust capacity, inductance and subsonic filtering. Phono Box SE II enjoys a clear sonic advantage over the standard Phono Box II.
Preamplifier for MM or MC with switches on the rear panel.
Impedance switch for MC cartridges.
Capacitance switch for MM cartridges.
Dual-mono architecture.
Ultra low-noise ICs.
SMD technology.
DC power possible (e.g. with rechareable batteries).
Kan sendes mot kjøpers risk og kostnad - har emballasjen. Betaler du forskudd så tar jeg frakten
Data fra produsentens side:
The Pro-Ject Phono Box SE II is a totally new design that lifts the performance to an even higher level. a premium chipset, a beefier power supply and the highest grade components form the basis of this audio marvel. it uses five parallel oP-amps for each channel. using SmD technology, the signal paths are reduced dramatically. the result is optimum sound quality and minimised levels of noise and distortion. Mini switches are used to adjust capacity, inductance and subsonic filtering. Phono Box SE II enjoys a clear sonic advantage over the standard Phono Box II.
Preamplifier for MM or MC with switches on the rear panel.
Impedance switch for MC cartridges.
Capacitance switch for MM cartridges.
Dual-mono architecture.
Ultra low-noise ICs.
SMD technology.
DC power possible (e.g. with rechareable batteries).
| Input impedances, MM | 12, 220, 340, & 440 pf/47 kohm |
| Input impedances, MC | 17, 18, 20, 22, 69, 100 & 220 ohms/120 pF |
| Gain, MM | 40 dB |
| Output voltage (MC input) | 300 mV / 1 kHz at 0.3 mV / 1 kHz |
| Gain, MC | 60 dB |
| Noise floor, MM | 95 dB (100 dB - A weighted) |
| Noise floor, MC | 75 dB (80 dB - A weighted) |
| THD MM | 0.03% |
| THD MC | 0.1% |
| RIAA-equalisation curve accuracy | 20 Hz - 20 kHz / max. 0.3 dB |
| Subsonic filter | at 18 Hz with 24 dB / octave |
| Outboard power supply | 16 V / 1.000 mA AC, suitable for your country's mains supply DC operation with battery |
| Power consumption | 16 V / 180 mA AC |
| DC power source | from ±12 to ±18 V DC |
| Dimensions | 103 x 72 x 144 mm |
| Weight | 1.05g without power supply |
